Slurry pumps: Vertical centrifugal pump with long shaft vom Hersteller

Vertical centrifugal pump with long shaft

Series V1/V2 Slurry pump with long or double shaft and intermediate bearing

For dry well installation of the pump, the pump hydraulics are sealed on the medium side with a mechanical seal. For wet well installation of the pump, the bearing is sealed on the shaft side by a mechanical seal and the hydraulics on the medium side with a throttle bushing. This V series benefits from the modular construction of our pump model series. The hydraulic parts of the V series can therefore be designed in models HPK, NPK, NPW and KB and are available as metallic, as well as elastomer-lined pumps.

Model V1: with this model, the drive shaft is designed as one part. Installation depths up to 2500 mm from the lower edge of the installation plate to the middle of the pump housing can be realised.This installation type is suitable for wet and dry well installations.

Model V2: in a model V2, the drive shaft is designed in two parts having an intermediate coupling. Due to this design, installation lengths up to 5000 mm from the bottom edge of the installation plate to the middle of the pump housing is possible. This installation type is suitable for wet and dry well installation.

Request Documents

Characteristics

Pumping flow	up to 2500 m³/h
Pumping height, single-stage	up to 60 M.FL.S
Pump rotational speed	up to 1480 min^-1
Connection nominal width	32 - 400
Maximum operating pressure	10 Bar
Temperature of the fluid	70 °C
Pressure nozzle position	any
Corrosion-resistance with PH	0 - 14

Spare parts

Our products deliver top performance for years, even under the most difficult conditions. But of course every component has to be renewed or replaced once after a very long load. Here, too, we are at your side as a reliable partner, because our products are still important to us even after delivery. Therefore, we would like to accompany and support you in the best possible way even after your purchase. Therefore, do not take any risks and trust exclusively in original spare parts and the decades of experience and high competence of Habermann Aurum Pumpen.

Contacts

Сontact us We are here for you to advice regarding all questions about pumping technology. Having analysed your application characteristics, we will develop an appropriate solution for you. Contact us!

Sales team Repair consultation Marketing